搜索

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Outdoor Cabinets - Battery Cabinets The battery cabinet for base station is a special cabinet to provide uninterrupted power supply for communication base stations and related equipment, which can be placed with various types of lead-acid batteries or lithium iron phosphate batteries to provide power supply for base stations and related equipment to ensure continuous operation of base stations without interruption of services under extreme conditions, help customers to improve the comprehensive service capability of upgrading communication system platforms and meet customer needs. Product Benefits (1) Small and beautiful, compact housing (less than 0.8 m2/unit) (2) Modular design, with high reliability, simple maintenance, flexible combination according to the different needs of customers (3) Support multi-scene and multi-functional applications (rooftop stations, street stations, suburban stations, operator co-stations, etc.) (4) Made of high quality hot-dip galvanized sheet with flame retardant material (5) Good insulation effect (PU core not less than 45MM) (6) Outdoor waterproof rating IP55 (7) Low cost of site selection (8) Compatible with a wide range of battery models (9) Support cabinet expansion (10) Intelligent temperature control system Product Type Product use (1) The installation of the cabinet fixed function: can be installed and fixed various types of lead-acid batteries or lithium iron phosphate batteries (2) Cabinet line management function: the cabinet has a variety of internal line management slot, line management frame, line management board and alignment channel, etc., to provide a very convenient wiring management for a variety of equipment installed inside the cabinet (3) Cabinet protection function: the cabinet is a relatively closed space, the cabinet door can be closed to the internal equipment to play a protective role to prevent damage from the outside, such as rats can be prevented from entering the cabinet inside the equipment or cable into the line damage (4) The cabinet can integrate refrigeration, access control, cabinet, lighting, fire protection, dynamic monitoring, emergency ventilation and other systems, and complete the integrated management of all subsystems through the monitoring system. (5) Provide reliable temperature control and regulation system for the full and stable operation of communication transmission equipment (6) Provide reliable grounding protection system for communication transmission equipment and cabinets. Product application tools All-in-one cabinets can be fully applied to business outlets (telecommunications, finance, energy, broadcasting, retail) small businesses, large enterprises, government, education, medical branches and networks between the edge of the data center, the use of tools need to be applied to: fusion machine, fiber optic cutting knife, fiber optic tester, pen red light source, optical power meter, dissecting pliers, diagonal pliers, screwdriver, the need to prepare the construction materials are: Anhydrous ethanol, adhesive tape, flexible plastic tape, fireproof mud, corrugated pipe, etc. Frequently Asked Questions Do you support non-standard product customization in addition to the above equipment sizes? Support, customers can put forward specific requirements according to their needs, the company supports non-standard customized products, can provide the corresponding battery specifications and related requirements, to provide non-standard design. What is the difference between the power supply of an integrated cabinet battery cabinet and a traditional cabinet? All-in-one cabinet battery cabinet can provide uninterrupted power supply for base stations and cabinets to ensure that equipment in extreme conditions such as power outages can ensure normal operation of equipment, while configured with a precision cooling system to ensure normal operation of IT equipment, with dynamic loop monitoring system to monitor the working status of equipment in real time. The integrated cabinet adopts a fully sealed design and can be used in a variety of harsh indoor environments without the need to set up separate server rooms. What are the advantages of an all-in-one cabinet? (1) Compared with traditional server room, integrated server room structure is simpler, factory pre-verification test is more standardized, safe and reliable compared with on-site construction; fully sealed design to eliminate the outside air dust and corrosive gases on IT equipment; dynamic loop monitoring system to monitor the infrastructure in a comprehensive manner, timely alarm abnormal conditions, security and worry-free. (2) More time-saving and labor-saving construction of the site, the modular design of the product allows the site to be installed and delivered within a day, more than 2 times faster than the traditional construction mode. (3) smaller footprint, a single cabinet covers an area of only 0.6m2 minimum, closed design, strong environmental adaptability, no decoration, flooring and other supporting works, effectively reducing the cost of building the station, fully enclosed refrigeration to enhance the energy efficiency of the whole machine, so that the total cost of ownership significantly reduced. (4) better management, one-stop after-sales service can deal with all kinds of equipment failure problems in a timely manner, saving time and effort; standard with dynamic loop monitoring system, local, remote monitoring and management, more multi-network access to the upper management platform unified supervision, diversified options to support. (5) Integrated and integrated design, integrated cabinet integration of UPS power supply, power distribution, refrigeration, access control, cabinets, lighting, fire, dynamic monitoring, emergency ventilation and many other systems, through the monitoring system to achieve integrated management of all subsystems to create an integrated product, simplify the design, procurement and construction process. 上一个产品 下一个产品

Product Details All Telecom Terminal & Server 通信 GJS03-M14AX-JX-144C(GP374) 帽式光缆接头盒, M11-14 该产品适用于室外光缆架空、管道等直通接续和分歧接续。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴。 技术参数 1、适应环境温度：-20℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-20℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、内六角扳手、卷尺、锯工。 参数表 型号GJS03-M14AX-JX-144C(GP374) 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：10-30mm 入缆口数：2+8 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：144 光纤余纤收容装置：否 密封方式：机械 光纤成端类型及数量：SC/24 Download Product Booklet Related Products 1/5 GJS03-M15BX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/6 GJS03-M15BX-A14-144C（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C（GP394） 帽式光缆接头盒, M11-14

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Fiber optic splitter box Fiber optic splitter box is a product developed and designed for different scenarios such as primary splitting or secondary splitting in FTTH construction, which is mostly used for wiring fiber optic cable to connect with incoming fiber optic cable through optical splitter to meet the demand of user's high rate bandwidth service opening, and is an important optical access equipment in ODN network. Fiber optic splitter box is used for outdoor, building or indoor connection trunk cable and wiring cable interface equipment, by the cable stripping fixed components, fusion module, storage area, etc., to complete the introduction of fixed fiber optic cable, fiber fusion wiring, installation management, leather cable inventory, fixed and fusion. The outdoor type can be wall-mounted or pole-mounted, and the indoor type can be wall-mounted in the building or weak well. Suitable for fiber optic access network wiring fiber optic cable and the home skin cable junction use, the box adopts the wall hanging or holding pole installation method, suitable for indoor and outdoor two scenarios: through SC, FC, LC type fiber adapter and fast connectors to connect and dispatch between the external armored fiber optic cable and the home skin cable. Product Benefits Non-metallic splitting and distribution box: (1) The box is made of high quality ABS, with high mechanical strength, solid wear resistance and long life; (2) The box can be installed in a variety of ways, according to the construction site, the role of different, using wall hanging, embedded wall or holding the pole installation, indoor and outdoor can be used. (3) Fully enclosed structure, moisture-proof, water-proof, dust-proof, anti-corrosion and anti-aging performance, outdoor type box protection grade IP55, indoor type box protection grade IP53. (4) Beautiful and generous appearance, suitable for most occasions. (5) Factory-made pigtails for high quality and low cost installation with less field fusion. (6) SC, FC, and LC adapters are available upon request. (7) A variety of box specifications models to choose from, a variety of sizes, suitable for a variety of scenes construction and installation. Metal splitting and distribution box: (1) The box body is made of high-quality cold-rolled steel plate, galvanized steel plate, stainless steel plate, and the surface of the box body adopts electrostatic spraying process, which has superior dustproof, anti-corrosion and aging resistance, and high safety performance; (2) The box can be installed in a variety of ways, according to the construction site, the role of different, using wall hanging, embedded wall or holding the pole installation, indoor and outdoor can be used. (3) Fully enclosed structure, moisture-proof, water-proof, dust-proof, anti-corrosion and anti-aging performance, outdoor type box protection grade IP55, indoor type box protection grade IP53. (4) Factory-made pigtails for high quality and low cost installation with less field fusion. (5) Beautiful and generous appearance, suitable for most occasions. (6) SC, FC, and LC adapters are available upon request. (7) A variety of box specifications models to choose from, a variety of sizes, suitable for a variety of scenes construction and installation. Product Type According to the different materials of the box, it can be divided into ABS plastic box and metal box. Product usage It is suitable for indoor and building to connect the introduction of fiber optic cable and butterfly cable or connect the vertical fiber optic cable and horizontal fiber optic cable in the building interface equipment. Fiber optic distribution box contains fiber optic cable terminal, fiber fusion or mechanical splicing protection unit, wall-mounted. Product application tools Optical fiber splitting box construction, the need to use to the tools are: fusion fiber machine, alcohol, power meter, anhydrous ethanol, OTDR tester, pigtail, dissecting pliers, fiber cutting knife, oblique pliers, horizontal ruler, impact drill, screwdriver, bellows, yellow tape, black tape, soft plastic tape, ring knife, fire clay, tin pliers, optical power meter, pen red light source, etc. Frequently Asked Questions Is it possible to customize the size of the equipment other than the above? Yes, we can design and produce according to the customer's requirements, or we can extend on the original basis. Is it harmful to have fiber optic splitter boxes at the door? Because this fiber optic splitter box is only some just splitter wiring port, and not too much power, naturally there will not be too much radiation, there is no harm to our human body. And this fiber optic distribution box is generally installed in the outdoor door, indoor and outdoor with the wall between this obstacle, will not bring any harm to everyone. Is there a flame retardant solution? Non-metallic material parts have the ability to resist corrosion and aging, non-metallic material parts (including insulated wire, cable and foam) for extended combustion materials, and their combustion properties can meet the requirements of flame retardant test. The difference between optical splitter box and optical splitter box? Optical splitter box: generally refers to the optical fiber splitter box, optical fiber splitter box is used for outdoor, building or indoor connection of the backbone cable and wiring fiber optic cable interface equipment. Optical splitter box: is one of the important passive components of the fiber optic link, is a fiber optic convergence device with multiple inputs and multiple outputs. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 RSBJ 500 Series Non-pressuriezd telephone cable joints splice closure Heat shrinkable sleeve provides electrical insulation, mechanical protection, environmental sealing and strain relief. Our heat shrinkable sleeve is available in single wall and double wall tubing designed for a variety of applications including back-end connector sealing, branching, and connector-to-cable transitions. Our heat shrinkable sleeve can be used with confidence as an alternative to taping, molding or gluing. When heated, our heat shrinkable sleeve will conform to the bottom dimensions of the substrate. Application Scenarios Sleeving for communication cable joint protection, can be used in overhead, pipeline, direct burial and other scenarios. Performance Features 1. Widely used in overhead, direct buried communication cable splicing, in -30 ℃ to +80 ℃ environment can work for a long time. 2. Color with aluminum composite super strong fiber structure, secondary sealing, so that high mechanical strength, tear resistance, heat shrinkage ratio, excellent weather resistance. 3. The inner sealing adopts high quality imported hot melt adhesive formula with superb bonding ability, and the heat shrinkable sleeve has excellent leak-proof, moisture-proof and pressure-bearing ability. Gum softening point can reach 85℃ high temperature, can adapt to areas with high ambient temperature. 4. The white line on the inside of the rail and the thermal paint on the outside surface of the product can guide the correct construction to make it just right. 5. Paper liner, easy and fast operation. Parameters table Commonly used tools for construction Artwork knife, tape measure, flame gun, etc. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M1AX-A8-24~96C(GP204) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、 tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-A8-24~96C(GP204) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-11mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 96 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecom Terminal & Server 通信 MODF架 钣金 光纤配线系列产品适用于中心局、光交节点、用户光纤接入网工程中各光接入点，完成光缆的引入、固定、开剥保护，光纤的熔接及保护，尾纤的存储及管理，光纤的固定连接及交叉连接的等功能，根据功能可分为线路侧光纤配线架、设备侧光纤配线架与光纤总配线架。 光纤总配线架集成了线路侧和设备侧ODF功能，具备高密度及灵活配线的特点，提高对光纤的有效管理和保护，满足传输机房、接入机房大量出局光缆的集中管理要求。网络集中化维护，节约维护成本，提高维护的规范水平和维护质量。 光纤总配线架是线路侧连接室外光缆、设备侧连接光线路终端或传输设备、可通过跳纤调度光缆中的纤芯序号及改变光传输系统的路序，且具有光缆固定与保护装置和测试端口。光纤总配线架分为开放式和封闭式两种结构。 产品优点 (1) 引用MDF总配线架管理模式：正面线路侧，背面设备侧，延续现有维护人员习惯； (2) 线路侧采用72芯熔接配线单元箱设计，设备侧采用96芯适配器旋转面板配线单元箱设计，操作方便； (3) “傻瓜式”路由：同一侧面逐层导入、逐层分流，方便操作维护、管理； (4) 架体有独立的多层光纤槽道，减少机房槽道压力，方便调度管理； (5) 可定制跳纤长度，减少光纤跳纤冗余和缠绕； (6) 线缆在架内实行分区管理，可实现立体无交叉跳纤路由； (7) 设有光缆存储装置，可存储光缆余长，左侧成端光缆，右侧存储跳纤。 产品类型 开放式MODF机架 开发式MODF机架结构采用双面架结构，横、直列机架由若干个熔配一体单元框和跳纤框组成，在横列单元中间可适当分布水平通道。直列机架采用72芯单元框加12芯熔配一体化托盘组成，横列机架采用96芯跳纤框。MODF架直列架侧又称为线路侧，用于外线光缆的集中熔接和成端，横列侧又称为设备侧，用于内线设备光纤的分配、调度。 封闭式MODF机架 封闭式MODF机架结构和开放式结构相同，只是在架体上安装有前后门和侧板，同样横、直列机架由若干个熔配一体单元框和跳纤框组成，在横列单元中间可适当分布水平通道。直列机架采用72芯单元框加12芯熔配一体化托盘组成，横列机架采用96芯跳纤框组成。横列侧和直列侧原理和开放式MODF一致。 光总配线架配置表 产品用途 光缆熔接、成端、连接、调度和存储 (1) 线路侧可用于光纤通信系统中局端主干光缆的成端和分配。 (2) 线路侧可方便地实现光纤线路的连接、分配、调度和存储。 (3) 设备侧是完成通信机房内不同光通信设备的连接、调度、调试等功能 (4) 同时能完成线路端和设备端的跳线富余长度的存储功能的一种光纤配线架。 产品应用工具 熔纤机、光缆切割刀、OTDR测试仪、笔式红光源、剥线钳、功率计、无水乙醇、光纤切割刀、斜口钳、水平尺、冲击钻、螺丝刀、光功率计。 常见问题解答 怎么判断现场选择封闭式还是敞开式MODF架？ 整排机架需要横向走纤连接的采用敞开式MODF架，不需要横向走纤连接的可选用封闭式MODF架。 产品的尺寸规格选择的依据是？ 在选择产品的尺寸时一般几个方面的考虑；1.是根据机房安装位置左右其他机柜的规格，选择相同或相近规格这样能保证视觉上的统一；2.根据安装位置的尺寸来定机架规格；3.根据所需要的芯数来选择。以上几点需要同时考虑。 产品适配器种类怎么选择-FC还是SC？ 根据机房里其他配套使用的设备所配适配器的种类来选择。 怎么判断机架使用带状纤还是束状纤？ 根据使用的光缆来选择，带状光缆则选择带状尾纤，束状光缆选择束状尾纤。 机架的颜色怎么选择？ 机架的颜色根据机房里面其他设备的颜色做到统一、美观。 Download Product Booklet Related Products 1/16 绝缘耐压固定装置（金具） 钣金 1/4 综合机柜 钣金 1/14 光缆终端盒 钣金 1/2 移动智慧厕所 钣金

Product Details All Telecom Terminal & Server Telecommunication GJS03-M1AX-JX-144C(GP335) Dome Fiber Optic Splice Closure, M 1 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、 compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、 torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, sawyer, tape measure. Parameter table Model: GJS03-M1AX-JX-144C(GP335) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried Download Product Booklet Related Products 1/3 GJS03-M1AX-A8-144C-W30(GP1416) Dome Fiber Optic Splice Closure, M 1 1/3 GJS03-M1AX-A8,SC-24 24-72C-D(GP297) Dome Fiber Optic Splice Closure, M 1 1/3 GJS03-M1AX-A8-24-96C-N08(GP218) Dome Fiber Optic Splice Closure, M 1 1/4 GJS03-M1AX-A8-24~96C(GP204) Dome Fiber Optic Splice Closure, M 1

Product Details All Telecom Terminal & Server 通信 GJS03-M3AX-216C-W01（GP211） 帽式光缆接头盒, M3 该产品适用于室外光缆架空、管道等直通接续和分歧接续，本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道、直埋等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、体积小巧，在管道或狭小空间更加适用； 6、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号：GJS03-M3AX-216C-W01（GP211） 盒体材质：PP 适应光缆直径：椭圆孔：10-25mm；小孔：6-22mm 入缆口数：2+5 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：216 光纤余纤收容装置：是 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 Download Product Booklet Related Products 1/4 GJS03-M3AX-24~288C-TZJ07-III-N15（GP286) 帽式光缆接头盒, M3

Product Details All Telecom Terminal & Server Terminal and Server 4 million HD vehicle capture camera QH-EBF401-PW AI class camera Key selling points (1) Embedded intelligent deep learning license plate detection algorithm (2) Identify the vehicle's license plate text information, recognition rate ≥ 95.0% (3) Built-in high-efficiency white light array lamp, low power consumption, full color night vision (4) National standard products after various strict tests Each main parameter index Product key parameters Download Product Booklet Related Products

Product Details All Telecom Terminal & Server 通信 GJS03-M12AX-1 8-12C（GP353） 帽式光缆接头盒, M11-14 该产品适用于室外光缆分纤分光的光纤入户工程。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、挂墙等安装、适用于光纤宽带网络接入网末端使用。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、光纤曲率半径>37.5mm,光纤熔接盘附加衰耗≤0.01dB； 4、具备光纤成端及熔接；可带微型光分路器最大1:8。 施工常用工具 十字改刀、卷尺。 参数表 型号：M12AX-1 8-12C（GP353） 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：皮线 光缆入缆口数：2+8 熔纤盘最大容量(芯）：12 最大熔接芯数(芯）：12 光纤余纤收容装置：否 密封方式：机械 光纤成端类型及数量：SC/8(可配微型光分路器） 产品使用环境：架空、管道、地埋 Download Product Booklet Related Products 1/5 GJS03-M15BX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/6 GJS03-M15BX-A14-144C（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C（GP394） 帽式光缆接头盒, M11-14